The fully enclosed wall-mounted package delivers dew points of ISO 8573.1 Class 1 and Class 2 with guaranteed flow rates of 7 to 50 scfm. Applications including labs, hospitals, and high-tech installations all benefit from the clean, dry air, improved productivity, and more floor space provided by DLW series.
Key Features
- CLEAN, STREAMLINED PIPING AND UTILITY CONNECTIONS SIMPLIFY INSTALLATION
- MINIMUM PURGE AIR USED, QUITE OPERATION
- PREMIUM GRADE DESICCANT BEADS ENHANCE SURFACE AREA AND HAVE HIGH CRUSH STRENGTH
- CONSISTENT ISO 8573.1 CLASS 1 AND CLASS 2 PRESSURE DEW POINTS
- HIGHLY ACCURATE SOLID STATE TIMER PREVENTS BED MOVEMENT AND LOSS OF PRESSURE DOWNSTREAM
- FRONT MOUNTED CONTROL PANEL
- AUTOMATIC OPERATION AND STORED ADSORPTIVE ENERGY RESULT IN LONG DESICCANT LIFE
- OPTIONAL GRADE 5 AND GRADE 7 FILTERS INCREASES LIFETIME OF DESICCANT AND AVOID SYSTEM CONTAMINATION
- STAINLESS STEEL SUPPORT SCREENS AND AIR DIFFUSERS
DL HEATLESS DESICCANT DRYERS
40-5400 SCFM
AVAILABLE FLOW RATES: 40 – 5400 SCFM. THE DL SERIES DRYERS ARE ENGINEERED WITH THREE APPLICATION SPECIFIC CONTROL SYSTEMS DELIVERING CONSISTENT OUTLET PRESSURE DEW POINTS TO ISO 8573.1 CLASS 1 (-100°F).
Key Features
- MINIMUM PURGE AIR USED OFFERS QUIET OPERATION
- PREMIUM GRADE DESICCANT BEADS ENHANCE SURFACE AREA AND HAVE HIGH CRUSH STRENGTH
- DESICCANT BEDS ENSURE 4.8 SECONDS OF CONTACT TIME
- LARGE FLOW DIFFUSERS ENSURE EVEN FLOW DISTRIBUTION THROUGH THE BED AND ELIMINATE CHANNELING
- UP-FLOW DRYING ALLOWS WATER AND HEAVY CONTAMINANTS TO DROP OUT OF THE AIR STREAM
- SEPARATE FILL AND DRAIN PORTS FOR EASE OF DESICCANT REPLACEMENT
- OPTIONAL PRE-MOUNTED FILTRATION PACKAGE INCREASES LIFETIME OF DESICCANT AND AVOID SYSTEM CONTAMINATION
- PRECISION SWITCH VALVES AUTOMATICALLY SHIFT TO LOW PRESSURE SIDE OF THE CIRCUIT TO CONTROL PROCESS FLOW
Three Optional Controller
- STANDARD CONTROLLER
- DELIVERS MAXIMUM VALUE TO APPLICATIONS THAT OPERATE AT OR NEAR FULL CAPACITY
- TIME CONTROLLED BED REGENERATION CYCLES OFFER CONSISTENT PERFORMANCE AND ECONOMY OF PURCHASE
- SIMPLE TIMER BASED CONTROLLER
- SELECTABLE PURGE CONTROLLER
- SELECTABLE ENERGY SAVINGS
- TAILOR THE DRYING CYCLES TO MATCH YOUR PEAK AIR DEMAND IN 10% INCREMENTS
- CONTROLLER OFFERS FOUR PRESSURE DEW POINT SETTINGS TO INCREASE YOUR SAVINGS AND ADAPT THE SYSTEM TO THE ENVIRONMENT
- AUTOMATIC ENERGY SAVING CONTROLLER
- MATCHES PURGE AIR USE TO THE DEMAND ON THE SYSTEM
- SELECT FROM FOUR PRESSURE DEW POINT SETTINGS TO OPTIMIZE YOUR SAVINGS FOR EACH SEASON
- CONTROLLER FEATURES VACUUM FLUORESCENT TEXT DISPLAY THAT COMMUNICATES ENERGY SAVINGS, OPERATING MODE AND SERVICE REMINDERS
DHP HEATED PURGE DESICCANT DRYERS
300-3200 SCFM
FS-CURTIS’ EXTERNALLY HEATED PURGE DESICCANT DRYERS OFFER GUARANTEED DEW POINT PERFORMANCE AND ARE EQUIPPED WITH OUR ADVANCED AMBIENT AIR AMPLIFICATION PURGE TECHNOLOGY.
DHP Series dryers consume less dried compressed air volume for regeneration purpose by the use of a low-watt density heater. Eliminate air loss to align supply-side equipment with demand-side requirements to optimize your air system.
Key Features
- PREMIUM GRADE DESICCANT BEADS ENHANCE SURFACE AREA AND HAVE HIGH CRUSH STRENGTH
- SOFT-SEATED CHECK VALVES TIGHT SHUTOFF AND DURABILITY
- LOW-WATT DENSITY HEATER SAVES ENERGY AND PREVENTS PREMATURE DESICCANT AGING
- HIGH QUALITY PRESSURE GAUGES DISPLAY LEFT TOWER, RIGHT TOWER, AND PURGE PRESSURE
- OPTIONAL PRE-MOUNTED FILTRATION PACKAGE INCREASES LIFETIME OF DESICCANT AND AVOID SYSTEM CONTAMINATION
- INLET SWITCHING/PURGE EXHAUST BUTTERFLY VALVES PROVIDE PREMIUM QUALITY OPERATION
- STANDARD CONTROLLER
- DELIVERS ISO 8573.1 DEW POINTS BETWEEN CLASS 2 AND CLASS 3 AUTOMATICALLY
- CLASS 2 (-40°F) DEW POINTS PROTECT AGAINST FREEZING DURING LOW AMBIENT CONDITIONS
- CLASS 3 (-4°F) DEW POINTS KEEP YOUR AIR SYSTEM BONE DRY DURING THE HEAT OF SUMMER
- DELIVERS ISO 8573.1 DEW POINTS BETWEEN CLASS 2 AND CLASS 3 AUTOMATICALLY
- OPTIONAL ENERGY MANAGEMENT CONTROLLER
- LOAD-MATCHING ENERGY MANAGEMENT SYSTEM FEATURES AMBIENT AIR AMPLIFICATION PURGE TECHNOLOGY
- GUARANTEES CLASS 2 (-40°F/-40°C) DEW POINTS
DHB BLOWER PURGE DESICCANT DRYERS
500-4300 SCFM
COMPRESSED AIR USERS HAVE RELIED ON FS-CURTIS TO PROVIDE COMPRESSED AIR TREATMENT SOLUTIONS FOR CRITICAL APPLICATIONS.
CAPACITY.
KEY FEATURES
- PREMIUM GRADE DESICCANT BEADS ENHANCE SURFACE AREA AND HAVE HIGH CRUSH STRENGTH
- SOFT-SEATED CHECK VALVES TIGHT SHUTOFF AND DURABILITY
- LOW-WATT DENSITY HEATER SAVES ENERGY AND PREVENTS PREMATURE DESICCANT AGING
- HIGH QUALITY PRESSURE GAUGES DISPLAY LEFT TOWER, RIGHT TOWER, AND PURGE PRESSURE
- INDUSTRIAL LEVEL HIGH CAPACITY BLOWERS OPERATE EFFICIENTLY AND QUIETLY
- OPTIONAL PRE-MOUNTED FILTRATION PACKAGE INCREASES LIFETIME OF DESICCANT AND AVOID SYSTEM CONTAMINATION
- INLET SWITCHING/PURGE EXHAUST BUTTERFLY VALVES PROVIDE PREMIUM QUALITY OPERATION